For ACL reconstruction.
| Catalog # | Description |
| 909913 | 0.31" (8 mm) Cannulated Drill Bit |
| 909915 | 0.35" (9 mm) Cannulated Drill Bit |
| 909917 | 0.39" (10 mm) Cannulated Drill Bit |
| 909919 | 0.43" (11 mm) Cannulated Drill Bit |
| 909921 | 0.47" (12 mm) Cannulated Drill Bit |
| 909871 | 15° Angle Osteotome |
| 909882 | 0.12" (3 mm) Tip Hole Changer |
| 909883 | 0.2" (5 mm) Tip Hole Changer |
| 909811 | 0.28" (7 mm) Sizing Sleeve |
| 909881 | Hole Changer Body |
| 909827 | Drill Point K-Wire |
| 909873 | Curved Roofplasty Gouge |
| 909931 | 0.28" (7 mm) Impingement Rod |
| 909933 | 0.31" (8 mm) Impingement Rod |
| 909935 | 0.35" (9 mm) Impingement Rod |
| 909937 | 0.39" (10 mm) Impingement Rod |
| 909939 | 0.43" (11 mm) Impingement Rod |
| 909941 | 0.47" (12 mm) Impingement Rod |
| 909627 | 0.28" (7 mm) Femoral Aimer Tip |
| 909628 | 0.31" (8 mm) Femoral Aimer Tip |
| 909629 | 0.35" (9 mm) Femoral Aimer Tip |
| 909630 | 0.39" (10 mm) Femoral Aimer Tip |
| 909631 | 0.43" (11 mm) Femoral Aimer Tip |
| 909632 | 0.47" (12 mm) Femoral Aimer Tip |
| 909617 | 0.28" (7 mm) Cannulated End Cutting Reamer |
| 909618 | 0.31" (8 mm) Cannulated End Cutting Reamer |
| 909619 | 0.35" (9 mm) Cannulated End Cutting Reamer |
| 909620 | 0.39" (10 mm) Cannulated End Cutting Reamer |
| 909621 | 0.43" (11 mm) Cannulated End Cutting Reamer |
| 909622 | 0.47" (12 mm) Cannulated End Cutting Reamer |
| 909640 | 3/32” Guide Pin/Graft Passing Pin (3) |
| 909623 | Femoral Aimer Handle (2) |
| 909627-03 | Ring Nuts (4) |
Trials available.
Photo is representative—please contact your sales rep for more complete details.
Arthrotek and Biomet are registered trademarks of Biomet Corporation.
