Designed to drive hex‑head screws in applications where non‑linear or limited‑access trajectories are required. Incorporating a universal joint (U‑joint) mechanism, the screwdriver allows controlled torque transmission at variable angles, enabling secure screw insertion in constrained anatomical or instrumented spaces. The instrument is intended for use with compatible Zimmer/Sulzer orthopedic screw systems and is commonly included in total hip and reconstructive instrumentation sets.
Key Features
-
Universal Joint (U‑Joint) Head
Allows angular articulation between the shaft and hex driver tip, facilitating screw placement where straight‑line access is not possible. -
Hex Head Driver Interface
Designed to engage compatible Zimmer/Sulzer hex‑head screws with secure torque transfer. -
Rigid, Straight Main Shaft
Provides stability and control while transmitting rotational force through the articulated joint. -
Durable Metallic Construction
Engineered to withstand repeated torque and sterilization cycles without mechanical degradation. -
System Compatibility
Intended for use within Zimmer/Sulzer orthopedic fixation and arthroplasty instrumentation systems. -
Reusable, Non‑Sterile Instrument
Supplied non‑sterile and designed for repeated clinical use following proper cleaning and sterilization.
Dimensions
- Overall Length: approximately 280–320 mm (11–12.6 in)
- Main Shaft Diameter: approximately 8–10 mm (0.31–0.39 in)
- Hex Drive Size: approximately 3.5 mm hex (typical Zimmer fixation size)
- U‑Joint Articulation Range: approximately 20–30° from axis
- Rod Geometry: straight shaft with distal universal joint
- Proximal End: solid handle or mallet‑compatible coupling surface
Zimmer is a registered trademark of that corporation.